Bambu Lab Matte PLA is designed for those seeking a sleek, matte finish in their 3D prints. This filament is perfect for those new to 3D printing or looking for an easy, reliable solution. It delivers consistent high-quality results without the need for intricate adjustments or advanced settings. With quick printing and superior aesthetics, Bambu Lab Matte PLA ensures your prints look exceptional. Plus, it simplifies the process with embedded printing parameters accessible through RFID and the Automatic Material System, streamlining the setup for hassle-free printing.

Drying PLA Matte is optional. Recommended drying condition is 55 ℃ for 8 hours in a blast drying oven, and 75 ℃ for 12 hours on printer's heatbed. Learn more about filament drying. Please refer to Filament drying cover on WIKI.

Technical Specs

Recommended Printing Settings

• Drying Settings (Blast Drying Oven): 55 °C，8 h
• Printing and Keeping Container's Humidity: <20% RH (Sealed, with Desiccant)
• Nozzle Temperature: 190 - 230 °C
• Bed Temperature (with Glue): 35-45 °C
• Printing Speed: <300 mm/s

Physical Properties

• Density: 1.31 g/cm³
• Vicar Softening Temperature: 63°C
• Heat Deflection Temperature: 58°C
• Melting Temperature: 163°C
• Melt Index: 39.4 ± 3.2 g/10 min

Mechanical Properties

• Tensile Strength: 30 ± 5 MPa
• Breaking Elongation Rate: 14.8 ± 4.2 %
• Bending Modulus: 2360 ± 250 MPa
• Bending Strength: 53 ± 6 MPa
• Impact Strength: 19.2 ± 3.7 kJ/m²

Accessory Compatability

• Recommended Build Plate: Cool Plate, High Temperature Plate or Textured PEI Plate
• Hotend: All Size / Material
• Glue: Bambu Liquid Glue, Glue Stick

Downloads

• Filament TDS
• Filament MSDS
• Filament RoHS

What's In The Box

• Filament & Desiccant
• Instuctions & Spool Sticker
• Box
• Filament Label

Highlights

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through the Bambu Lab AMS (Automatic Material System). Load and print! No more tedious setting steps.

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

If you don't have the spool model in your printer, you can download it here.