Free Shipping over $200 | Orders ship out at 2pm EST and PST - Monday-Friday

MakerBot Method Announced: How Does It Compare to the Replicator?

December 12, 2018

This week MakerBot introduced their new Method 3D printer to be released in 2019. Starting at $6499 US ($8650 CAD) this printer is promising faster speeds and breakthrough technologies by leveraging patents from their parent company, Stratasys. We're going to review how it compares to their previous generation of printers, the MakerBot Replicator+, and Makerbot Replicator Z18.

Tech Specs

Replicator + Replicator Z18 Method
Build Volume 29.5 L X 19.5 W X 16.5 H CM
(11.6 X 7.6 X 6.5 IN)
30.0 L x 30.5 W x 45.7 H CM
(11.8 L x 12.0 W x 18.0 H IN)

Single Extrusion
19 L x 19 W x 19.6 H CM
(7.5 L x 7.5 W x 7.75 H IN)

Dual Extrusion
15.2 L x 19 W x 19.6 H CM
(6.0 L x 7.5 W x 7.75 H IN)

Print Heads 1 1 2
Layer Resolution 100 microns 100 microns Range: 20 - 400 microns
Filament Diameter 1.75 mm 1.75 mm 1.75 mm
Camera Resolution 640 x 480 320 x 240 640 x 480

 

Highlights

There are four features that really stand out as highlights for this new MakerBot model: Dual Extrusion, Dry-Sealed Material Bays, Auto Leveling and the Circulating Heated Chamber.

Dual Extrusion

We're no strangers to Dual Extrusion as Ultimaker added it to their printers back in 2016 with the Ultimaker 3 and continued to advance its use in their recently released flagship printer, the Ultimaker S5. The Sigma R19 revision that came out this year also includes dual extrusion with independent moving heads. So we're happy to see Makerbot join the fray with their own rendition.

Dual extrusion allows you to print two-coloured parts which adds a level of polish to prototypes, but it is more than fancy colours. Dual extrusion also allows for the use of support materials, like the water-soluable PVA for prints with complex geometries and overhangs.

Standard same-material supports are difficult to remove, limiting their use for small and hard to reach areas. They also can cause damage to the print surface during removal leaving an undesirable surface. With PVA soluble supports you can literally dissolve the support material in water. 

Dry-Sealed Material Bays

Humidity can be a major problem for filaments. The material absorbs the water from the air over time and this can lead to crackling sounds during printing and majorly reduced print quality. We can combat this issue by storing filaments in sealed bags with silica packets or using specialty containers and dryers.

MakerBot seeks to prevent this with their dry-sealed material bays. Tucked under the printer, it uses temperature and humidity control sensors to make sure the material is stored in an optimal environment. 

This is a fairly unique feature for desktop printers and we're excited to see if it is successfully implemented.

Circulating Heated Chamber

Heated beds are utilized by FDM 3D printers to prevent warping by keeping the extruded plastic warm. The MakerBot Method goes in a different direction with "full active heat immersion" to keep the temperature consistent for the entire around the entire print. This isn't something that is needed for PLA, but might be useful for printing with PETG and may mean they will be including more material options in the future.

Conclusion

Overall, it looks like MakerBot is working toward a better printer for professional users and we're looking forward to seeing how these innovations and modifications perform.  The Method will be available in Q1 2019 through Shop3D.ca.



Also in News

Introducing the latest update to Einstar software: EXStar v1.2
Introducing the latest update to Einstar software: EXStar v1.2

March 28, 2024

Einstar, Shining 3D’s most affordable scanner is known as the handheld 3D scanner which makes high-quality 3D data available and accessible to everyone. It comes pre-installed with its own software, the EXStar v1.0.6.0, which is user-friendly and incredibly easy to use. The EXStar software has now gotten a new look, with a shiny new upgrade: the EXStar v1.2! The Einstar team has implemented years of user feedback in this new upgrade; elevating data quality and delivering clearer, sharper scans with richer, more realistic textures.

Continue Reading

How to Extend Your BOFA Air Filter Life
How to Extend Your BOFA Air Filter Life

February 15, 2024

Many factors can cause a shortened filter life, such as the set-up, printing process, materials used, and the day-to-day maintenance of the technology. This article covers the factors affecting your air filtration system and how to extend its lifespan.

Continue Reading

Ecoflow: Uninterrupted Power Solutions for 3D Printing
Ecoflow: Uninterrupted Power Solutions for 3D Printing

February 13, 2024

Power outages during 3D printing can be very costly. So when we decided to stock the Ecoflow, it only made a lot of sense because it is an essential product for anyone to add to their 3D printing farm. Discover the numerous benefits of the Ecoflow, and how it is even more efficient than having a UPS as backup power for your printers.

Continue Reading